802WD ATEX
INDUSTRIAL WET & DRY VACUUM CLEANER WITH ATEX CERTIFICATION

The 802WD industrial Wet & Dry vacuum cleaner is the ideal solution for sucking up large quantities of liquids mixed with dust. Steel container with large liquid storage capacity and easy machine handling make it the perfect solution for all types of liquid waste. Double antistatic filtration kit and grounding make it suitable for sucking up liquids in low-risk areas. The handy drainage valve on the rear means it is quick and easy to empty. A range of ATEX certifications make it is suitable for every type of use in explosion hazard zones. Also available in con-certified electric version or powered by compressed air.

OTHER SETUPS

802W BL - II 3D
ATEX ZONE 22 CERTIFIED WET & DRY VACUUM CLEANER

  • Electronics
  • Packaging
  • Optics
  • Plastics
  • Textile
ATEX ZONE 22 CERTIFIED WET & DRY VACUUM CLEANER 802WD Z22 - II 3D

In the single-phase version, a powerful, maintenance-free, brushless motor generates high vacuum levels in a machine that is also easy to handle. In the three-phase version a powerful side channel blower makes continuous duty vacuuming possible, without any loss in performance.

ADVANTAGES

  • Vacuum gauge to detect filter clogging
  • Easy filter replacement
  • Floating device to stop the suction when container is full
  • Stainless steel AISI304 collection tank
  • Earth grounding
  • Easy to clean and to maintain
  • ATEX-certified Z22
  • Motor with very long service life
  • Maximum safety thanks to the three levels of air filtration
  • Accessory kit included

DATASHEET

Index UnitMTL 802 BL
Power kW1,1
Max water liftmmH₂O2.250
Max air flowm³/h215
Suction inletmm80
Noise level (EN ISO 3744)dB(A)74
Motor cooling filterCAT2x E10
Air exhaust filterCATE10
Filter TypeBag
Dimensionscm51x59x116h
Weightkg40
Download MTL 802 BLDownload technical sheet

802WD - II 3GD
ATEX ZONE 2 CERTIFIED INDUSTRIAL WET & DRY VACUUM CLEANERS

  • Chemical-pharmaceutical
  • Electronics
  • Plastics
  • Waste treatment - Recycling
ATEX ZONE 2 CERTIFIED INDUSTRIAL WET & DRY VACUUM CLEANERS 802WD Z2 - II 3G

Equipped with a powerful side channel blower with Atex 3GD marking and certified for use in Atex 2/22 zones. The perfect Wet & Dry vacuum cleaner for sucking up liquids in areas where an explosion atmosphere due to gas is rare.

ADVANTAGES

  • Side channel blower motor , powerful and silent, totally maintenance free, suitable for continuous duty
  • Compact and mobile
  • Easy filter replacement
  • Discharge hose for liquids
  • Atex certified for Zone 22
  • Atex certified for zone 2
  • Stainless steel AISI304 collection tank
  • Earth grounding
  • Simultaneous suction of solid, dust and liquid material

DATASHEET

Index UnitMTL 802 WD EX 3GD MMTL 802 WD EX 3GD T
Atex zonesATEX Z2/22ATEX Z2/22
Marking3GD3GD
VoltageV - Hz230 - 50400 - 50
Power kW1,81,8
Electrical protectionIP6767
Max water liftmmH2O1.8001.800
Max air flowm³/h250250
Suction inletmm8080
Noise level (EN ISO 3744)dB(A)7070
Filter TypeBagBag
Surface - Diametercm²-mm8.000 - 4208.000 - 420
Material - EfficiencyIEC 60335-2-69Polyester - ANT MPolyester - ANT M
Collection tankAISI304 Stainless steelAISI304 Stainless steel
Discharge systemDischarge hoseDischarge hose
Capacitylt.8080
Dimensionscm53x66x120h53x66x120h
Weightkg4343
Download MTL 802 WD EX 3GD MDownload technical sheet
Download MTL 802 WD EX 3GD TDownload technical sheet

Ask for a free quotation