DG HD
HIGH POWER INDUSTRIAL VACUUM CLEANERS FOR SOLIDS, LIQUIDS AND DUST

  • Steelworks and Foundries
  • Cement works and construction industry
  • Power plants
  • Waste treatment - Recycling
Automatica cleaning system for industrial vacuum cleaner

All the power of a high headed side channel blower, built-in automatic cleaning system and extremely high suction pressure; these are just some of the reasons why DG HD industrial vacuum cleaners are not just simple industrial vacuums, but veritable tools for handling or removing large amounts of material. DG machine models can increase the efficiency andproductivity of any heavy industry, from cement factories to foundries. Wherever there are large and heavy amounts of materials (evenseveral cubic meters), this vacuum cleaner will make all the difference. Best when used as vacuum units in a centralised vacuum systemin combination with Delfin’s filtering and separating units.

ADVANTAGES

  • Side channel blower motor , powerful and silent, totally maintenance free, suitable for continuous duty
  • Largest surface filter in its category
  • Tangential suction inlet with integrated separation cyclone
  • Complete steel construction
  • Pressure relief valve for motor protection
  • Vacuum gauge to detect filter clogging
  • Star-triangle switchboard
  • High filtration efficiency
  • Suitable for high specific weight material
  • Fork lift intakes included
  • Integrated automatic filter cleaning system

DATASHEET

Index UnitDG 200DG 300 HD
VoltageV - Hz400-50 3~400-50 3~
Power kW18,525
Electrical protectionIP6565
Max waterliftmmH2O44004500
Max air flowm³/h13502200
Suction inletmm120120
Noise level (EN ISO 3744)dB(A)7778
Filter TypeStarStar
Surface - Diametercm²-mm120.000 - 780120.000-780
Material - EfficiencyIEC 60335-2-69Polyester - LPolyester - L
Air load on filter m³/m²/h112171
Cleaning systemAutomatic AUTAutomatic AUT
Capacitylt.220220
Dimensionscm92x220x220h92x220x220h
Weightkg660805
Download DG 200Download technical sheetDownload DG 300 HDDownload technical sheet

OTHER SETUPS

DG 300 SE
INDUSTRIAL VACUUM CLEANER FOR VERY HEAVY MATERIAL EXTRACTION

  • Steelworks and Foundries
  • Cement works and construction industry
  • Sand blasting
  • CVS
INDUSTRIAL VACUUM CLEANER FOR VERY HEAVY MATERIAL EXTRACTION DG 300 SE

The DG 300 SE industrial vacuum cleaner has a powerful blower with two impellers connected in series, capable of generating the extremely high vacuum levels necessary for sucking up very heavy materials, also from a distance or in sunken, difficult-to-reach areas.

ADVANTAGES

  • Side channel blower motor , powerful and silent, totally maintenance free, suitable for continuous duty
  • Integrated filter cleaning system
  • Tangential suction inlet with integrated separation cyclone
  • Extractable collection container with optional use of disposable bags
  • Pressure relief valve for motor protection
  • Vacuum gauge to detect filter clogging
  • Star-triangle switchboard
  • Easy filter replacement
  • Suitable for high specific weight material
  • Long lasting

DATASHEET

Index UnitDG 300 SE
VoltageV - Hz400-50 3~
Power kW20
Electrical protectionIP65
Max waterliftmmH2O4500
Max air flowm³/h1100
Suction inletmm120
Noise level (EN ISO 3744)dB(A)77
Filter TypeStar
Surface - Diametercm²-mm120.000-780
Material - EfficiencyIEC 60335-2-69Polyester - L
Air load on filter m³/m²/h92
Cleaning systemAutomatic AUT
Capacitylt.220
Dimensionscm92x220x220h
Weightkg760
Download DG 300 SEDownload technical sheet

DG HD PN
INDUSTRIAL VACUUM CLEANER FOR EXTRACTING LARGE VOLUMES OF DRY DUST

  • Steelworks and Foundries
  • Cement works and construction industry
  • Power plants
  • Chemical-pharmaceutical
  • Building and construction
  • Electronics
  • Rubber
  • Packaging
  • Cleaning contractors
  • Goldsmiths
INDUSTRIAL VACUUM CLEANER FOR EXTRACTING LARGE VOLUMES OF DRY DUST DG HD PN

DG HD PN industrial vacuum cleaners are the perfect solution for sucking up enormous quantities of dry dust. The PN cleaning system consists of high surface area filter cartridges which are automatically and systematically cleaned by a reverse pulse filter cleaning system, thus eliminating the risk of build-up in the cartridge filters installed.

ADVANTAGES

  • Side channel blower motor , powerful and silent, totally maintenance free, suitable for continuous duty
  • Tangential suction inlet with integrated separation cyclone
  • Complete steel construction
  • Pressure relief valve for motor protection
  • Vacuum gauge to detect filter clogging
  • Hour meter for planned maintenance
  • Star-triangle switchboard
  • Reduced downtime of machine tools
  • High filtration efficiency
  • Integrated automatic filter cleaning system

DATASHEET

Index UnitDG 300 PNDG 200 PN
VoltageV - Hz400-50 3~400-50 3~
Power kW2518,5
Electrical protectionIP6565
Max waterliftmmH2O45004400
Max air flowm³/h20501350
Suction inletmm120120
Noise level (EN ISO 3744)dB(A)7777
Filter TypeCartridgeCartridge
Surface - Diametercm²-mm260.000260.000
Material - EfficiencyIEC 60335-2-69Polyester - ANT MPolyester - ANT M
Air load on filter m³/m²/h7952
Cleaning systemAutomatic PNAutomatic PN
Cartridge number44
Capacitylt.220220
Dimensionscm92x220x220h92x220x220h
Weightkg825685
Download DG 300 PNDownload technical sheetDownload DG 200 PNDownload technical sheet

Ask for a free quotation